fault annunciators and combined operating fault indicators
for panel mounting

     

For use in switchcabinet doors, mosaic-arrangements, etc. ,
96 * 96mm respectively 144 * 72mm housing !

Versions with one- or two frequency flashlight - indication , or as combined operating fault annunciator !

       
LAB 8-1
LAB 16-1 		 
  • LED-monitoring module
    for 8 or 16 signals with exchangeable LEDs
    alarm voltage 24V AC/DC or 230V AC
    optionally with 2-wire interface
LAB 8-1M
LAB 16-1M 		 
  • LED-monitoring module
    for 8 and 16 signals with exchangeable LEDs
    alarm voltage 24V AC/DC or 110V DC or 230V AC
    Collective report contact programmable per each channel
    Open- and closed circuit principle version available
SSM 8 A
SSM 16 A 		 
  • Standard fault annunciator
    for 8 or 16 alarms 24V ... 250V AC/DC
    Functions programmable by jumpers
    with 1-frequency flash light
SSM 8 A-1
SSM 16 A-1 		 
  • Standard fault annunciator
    for 8 or 16 alarms 24V ... 250V AC/DC
    no first up alarm, break input principle
    retriggering horn fixed, signalling sequence preset
    with 1-frequency flash light

SRM 8

 
  • Standard fault annunciator
    for 8 alarms 24V ... 250V AC/DC
    and relay output for each alarm
    Functions programmable by jumpers
    with 1-frequency flash light

SSM 16 R

 
  • Standard fault annunciator
    for 16 alarms 24V ... 250V AC/DC
    Alarm No. 8 for trip 10ms switch on delay
    2 selectable alarm priorities
    external relay output module

SSM 16 R-B5A

 
  • Complete - standard fault annunciator
    for 16 alarms 24V ... 250V AC/DC
    Operation indication with green LED and live contact
    2 frequency flashing display
    external relay output module

SZM 16

 
  • Standard fault annunciator with
    1- or 2 frequency flash light
    for 16 alarms 24V ... 250V AC/DC
    16 relay contacts either parallel to in- or outputs
    functions programmable by DIP-switches
    optional 2-wire interface
    special functions at factory settings available

LSM 8

 
  • Standard operating fault annunciator
    for 8 alarms 24 ... 250 V AC/DC and
    8 operation indications
    Alarm voltage 24 V... 250 V AC/DC
    Screw terminals pluggable
    Potential separation of all current circuits by optocoupler
    No first up alarm, break input priciple,
    retriggering horn fixed

FSM-preinfo

 
  • New drop-type intelligent annunciator
    FSM 10     combines robust signalling technology –
    a million times approved in hard operating conditions in vehicles –
    with intelligent electronics and software. The flexible module is designed for universal use.